No te quedes atrás. 5 vídeos OpenClaw gratis →
← Volver a todas las comparaciones

IA dedicada versus bricolaje

ClawBox frente a Raspberry Pi 5 para cargas de trabajo de IA

La Pi es una gran placa de uso general. Pero para una IA siempre activa con inferencia local, ClawBox ofrece 33 veces más computación de IA, diseñada específicamente, no improvisada.

ClawBox vs Raspberry Pi 5

La brecha de desempeño

Computación de IA medida en TOPS (billones de operaciones por segundo)

🦞 ClawBox (Jetson Orin Nano Super)67 TOPS
67 TOPS — 1024-core NVIDIA Ampere
🍓 Raspberry Pi 52 TOPS
~2 TOPS
33×más computación de IA
Desarrollado por NVIDIA

ClawBox — Llama 3.1 8B

~5 tok/s

Velocidad de conversación utilizable

Raspberry Pi 5 — Llama 3.1 8B

~0.5 tok/s

Dolorosamente lento (solo CPU)

El costo oculto del bricolaje

El Pi "cuesta 80€" pero eso es sólo la placa...

🍓 Raspberry Pi 5 Lista de compras

Raspberry Pi 5 (8GB)€80
NVMe SOMBRERO + SSD (256GB)€35
Caja + disipador/ventilador€15
Fuente de alimentación (27W USB-C)€12
Tarjeta microSD (para arranque)€8
Subtotal (hardware)~€150
+ Tu sábado (hora de preparación)3-5 hours

Aún no hay CUDA, no hay aceleración de GPU, caja de plástico

ALL-IN-ONE

🦞 ClawBox — Todo Incluido

NVIDIA Jetson Orin Nano Super (67 TOPS)
512 GB NVMe SSD (preinstalado)
Caja color carbón
Fuente de alimentación (20W)
OpenClaw preconfigurado
Listo para la automatización del navegador
Configuración de 5 minutos
Total€549

Color carbón, NVIDIA CUDA, lista en 5 minutos

¿Tu sábado vale 249€?

Comparación completa

Feature
ClawBox
🍓 RPi 5
🧠Rendimiento de la IA67 TOPS~2 TOPS (solo CPU)
🎮GPU1024 núcleos NVIDIA AmpereVideoCore VII (nº CUDA)
💾Memoria8GB LPDDR5 (unificado)8GB LPDDR4X
📀Almacenamiento512GB NVMe SSD incluidomicroSD (comprar por separado)
🤖Ejecutar 7B LLM~5 fichas/seg~0,5 fichas/seg
⚙️CUDA SoporteKit de herramientas completo CUDANinguno
Consumo de energía15-25W5-12W
💰Precio Total549€ (completo)~150€+ (pensión + extras)
📦PreconfiguradoSí, fuera de la cajaSe requiere configuración manual
💬MensajeríaTelegram · WhatsApp · DiscordConfiguración manual
🌐Automatización del navegadorA toda velocidadLento / limitado
🎙️Canal de voz en el dispositivoWhisper STT + Kokoro TTS en núcleos tensorialesDemasiado lento para tiempo real
📡ConectividadDoble banda WiFi + Bluetooth 5.0WiFi + BT (necesita sombrero para algunos)
🏗️CasoColor carbón incluidaComprar por separado (plástico)

Elija ClawBox

Profesional dedicado a la IA

  • Quieres un asistente de IA dedicado que funcione las 24 horas, los 7 días de la semana
  • Necesita inferencia LLM local (privacidad primero)
  • Quieres plug-and-play, no horas de configuración
  • Necesita CUDA para cargas de trabajo de ML/AI
  • Quieres IA real acelerada por GPU, no inferencia de CPU

Elija Raspberry Pi

Servidor de uso general

  • El presupuesto es la máxima prioridad
  • Solo necesitas IA basada en la nube (llamadas API)
  • Quieres un servidor general (Pi-hole, Home Assistant)
  • El consumo de energía más bajo posible es lo más importante

Compare Raspberry Pi against the full OpenClaw hardware field

Raspberry Pi is only one end of the spectrum. For the full picture, including ClawBox, Mac Mini, cloud VPS setups, and what counts as the best OpenClaw hardware for different budgets, continue to the main hardware guide.

See the best hardware for OpenClaw

Frequently Asked Questions

How much faster is ClawBox than a Raspberry Pi 5 for local AI?

ClawBox is built on the NVIDIA Jetson Orin Nano Super, which delivers about 67 TOPS of AI compute from a 1024-core Ampere GPU. The Raspberry Pi 5 has no AI accelerator and manages roughly 2 TOPS on its CPU — so ClawBox has about 33× more AI compute. In practice, running Llama 3.1 8B, ClawBox produces around 5 tokens/sec versus roughly 0.5 tokens/sec on a Pi 5, which is the difference between a usable assistant and an unusably slow one.

What AI models can a Raspberry Pi 5 run, and what can ClawBox run?

A Raspberry Pi 5 can technically load small quantized models (1B–3B parameters like Gemma 2B or Phi-3 Mini) but only at painfully slow speeds, and 7B–8B models are effectively impractical. ClawBox runs Llama 3.1 8B, Mistral 7B, Phi-3, and Gemma at usable speeds on its GPU, plus Whisper Large v3 for speech-to-text and Kokoro TTS for voice — all on-device with CUDA acceleration.

Does the Raspberry Pi 5 have CUDA or GPU acceleration for AI?

No. The Raspberry Pi 5 uses a VideoCore VII GPU that is designed for display and basic graphics, not AI inference, and it does not support CUDA. That means most AI frameworks fall back to CPU-only inference on a Pi. ClawBox's NVIDIA Jetson GPU supports CUDA, so Ollama and other tooling can offload model inference to 1024 GPU cores for dramatically faster, more efficient results.

What is the real total cost of a Raspberry Pi 5 AI build vs ClawBox?

A Raspberry Pi 5 AI setup is not just the €80 board. By the time you add an NVMe drive (~€35), a case (~€15), a power supply (~€12), and an SD card (~€8) you are around €150 — plus 3–5 hours of assembly, flashing, and configuration, and you still end up with only ~2 TOPS of CPU compute. ClawBox is €549 fully assembled and pre-configured with the GPU, models, and software ready to use out of the box.

When does a Raspberry Pi 5 make more sense than ClawBox?

The Raspberry Pi 5 is the better choice when AI is not the goal: lightweight tinkering, GPIO/electronics projects, retro gaming, a low-power home server, or learning Linux on a tight budget. Its low price and minimal power draw are genuine advantages. But if you specifically want to run a capable local AI assistant — chat, coding help, voice, and browser automation at usable speeds — the Pi's ~2 TOPS simply cannot keep up, and ClawBox's 67 TOPS GPU is the right tool.

¿Listo para cambiar?

Deja de comparar, empieza a construir. ClawBox es hardware de IA plug-and-play, listo en 5 minutos.

🛡️ Garantía de devolución de dinero de 30 días

Pago seguro vía Stripe